public override void NameKnownMaps(byte[] allBytes, SymbolCollection newSymbols, List<CodeBlock> newCodeBlocks)
{
//N146 Pump Voltage map:
SymbolAxesTranslator st = new SymbolAxesTranslator();
foreach (SymbolHelper sh in newSymbols)
{
//sh.X_axis_descr = st.TranslateAxisID(sh.X_axis_ID);
//sh.Y_axis_descr = st.TranslateAxisID(sh.Y_axis_ID);
if (sh.Length == 544)
{
if (sh.X_axis_length == 16 && sh.Y_axis_length == 17)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
sh.Varname = "N146 Pump voltage map [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
//sh.Correction = 0.001221001; // ?1.221001
//Todo: N146 correction factor for MSA15
sh.X_axis_correction = 0.01;
sh.Z_axis_descr = "Pump voltage (V)";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
}
}
if (sh.Length == 448)
{
if (sh.X_axis_length == 16 && sh.Y_axis_length == 14)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
sh.Varname = "N146 Pump voltage map [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
//sh.Correction = 0.001221001; // ?1.221001
//Todo: N146 correction factor for MSA15
sh.X_axis_correction = 0.01;
sh.Z_axis_descr = "Pump voltage (V)";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
}
}
//12x13 E0 DD = EGR
if (sh.Length == 416)
{
if (sh.X_axis_length == 16 && sh.Y_axis_length == 13)
{
if (sh.X_axis_ID == 0xE08A && sh.Y_axis_ID == 0xDDD8)
{
sh.Category = "Detected maps";
sh.Subcategory = "Turbo";
sh.Varname = "N75 duty cycle [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Duty cycle %";
sh.Correction = -0.01;
sh.Offset = 100;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID == 0xE08A && sh.Y_axis_ID == 0xDD30)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
int egrCount = GetMapNameCountForCodeBlock("EGR", sh.CodeBlock, newSymbols, false);
sh.Varname = "EGR " + egrCount.ToString("D2") + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.1;
sh.X_axis_correction = 0.01;
sh.Z_axis_descr = "Mass Air Flow (mg/stroke)";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID == 0xE08A && sh.Y_axis_ID == 0xDEDC)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
int injDurCount = GetMapNameCountForCodeBlock("Start of injection (N108 SOI)", sh.CodeBlock, newSymbols, false);
sh.Varname = "Start of injection (N108 SOI) " + injDurCount.ToString() + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.Correction = 0.023437;
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.X_axis_correction = 0.01; // TODODONE : Check for x or y
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xDE)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
int egrCount = GetMapNameCountForCodeBlock("EGR", sh.CodeBlock, newSymbols, false);
sh.Varname = "EGR " + egrCount.ToString("D2") + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.1;
sh.X_axis_correction = 0.01;
sh.Z_axis_descr = "Mass Air Flow (mg/stroke)";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xDD)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
int injDurCount = GetMapNameCountForCodeBlock("Start of injection (N108 SOI)", sh.CodeBlock, newSymbols, false);
sh.Varname = "Start of injection (N108 SOI) " + injDurCount.ToString() + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.Correction = 0.023437;
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.X_axis_correction = 0.01; // TODODONE : Check for x or y
sh.X_axis_descr = "IQ (mg/stroke)";
sh.XaxisUnits = "mg/st";
sh.Z_axis_descr = "Start position (degrees BTDC)";
}
else if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xDC)
{
// IQ by MAP
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "IQ by MAP limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") +" " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.Correction = 0.01;
sh.X_axis_descr = "Boost pressure";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Z_axis_descr = "Maximum IQ (mg)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mbar";
}
}
}
else if (sh.Length == 384)
{
if (sh.X_axis_length == 12 && sh.Y_axis_length == 16)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Inverse driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.Z_axis_descr = "Throttle position";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
//sh.Z_axis_descr = "Requested IQ (mg)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
}
else if (sh.X_axis_length == 16 && sh.Y_axis_length == 12)
{
int smCount = GetMapNameCountForCodeBlock("Smoke limiter", sh.CodeBlock, newSymbols, false);
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "Smoke limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.X_axis_descr = "Airflow mg/stroke";
sh.Correction = 0.01;
sh.X_axis_correction = 0.1;
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
}
else if (sh.Length == 320)
{
if (sh.X_axis_length == 16 && sh.Y_axis_length == 10)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xDC)
{
int smCount = GetMapNameCountForCodeBlock("Smoke limiter", sh.CodeBlock, newSymbols, false);
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "Smoke limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.X_axis_descr = "Airflow mg/stroke";
sh.Correction = 0.01;
sh.X_axis_correction = 0.1;
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC3)
{
sh.Category = "Detected maps";
sh.Subcategory = "Turbo";
int boostTargetCount = GetMapNameCountForCodeBlock("Boost target map", sh.CodeBlock, newSymbols, false);
sh.Varname = "Boost target map (" + boostTargetCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Z_axis_descr = "Boost target (mbar)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
sh.Category = "Detected maps";
sh.Subcategory = "Turbo";
int boostTargetCount = GetMapNameCountForCodeBlock("Boost target map", sh.CodeBlock, newSymbols, false);
sh.Varname = "Boost target map (" + boostTargetCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Z_axis_descr = "Boost target (mbar)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xDD)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
sh.Varname = "IQ to airmass [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Required airmass";
sh.Correction = 0.1;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID == 0xE08A && sh.Y_axis_ID == 0xDEDC)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
sh.Varname = "IQ to airmass [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Required airmass";
sh.Correction = 0.1;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
else if (sh.X_axis_ID == 0xE08A && sh.Y_axis_ID == 0xC2D0)
{
sh.Category = "Detected maps";
sh.Subcategory = "Turbo";
int boostTargetCount = GetMapNameCountForCodeBlock("Boost target map", sh.CodeBlock, newSymbols, false);
sh.Varname = "Boost target map (" + boostTargetCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Z_axis_descr = "Boost target (mbar)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mg/st";
}
}
}
else if (sh.Length == 256)
{
if (sh.X_axis_length == 16 && sh.Y_axis_length == 8)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC1)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC0)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
}
}
else if (sh.Length == 200)
{
if (sh.X_axis_ID / 256 == 0xC2 && sh.Y_axis_ID / 256 == 0xE0)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "Boost limit map [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
// sh.Correction = 0.01;
//sh.X_axis_correction = 0.01;
sh.Y_axis_descr = "Atmospheric pressure (mbar)";
sh.Z_axis_descr = "Maximum boost pressure (mbar)";
sh.X_axis_descr = "Engine speed (rpm)";
sh.XaxisUnits = "rpm";
sh.YaxisUnits = "mbar";
}
}
else if (sh.Length == 192)
{
if (sh.X_axis_length == 12 && sh.Y_axis_length == 8)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC1)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
}
}
else if (sh.Length == 182) // 7*13
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC1)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "Driver wish [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC2)
{
if (IsValidTemperatureAxis(allBytes, sh, MapViewerEx.AxisIdent.Y_Axis))
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
//sh.Varname = "Boost limiter (temperature) [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Varname = "SOI limiter (temperature) [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.023437;
sh.Y_axis_descr = "Engine speed (rpm)";
sh.X_axis_descr = "Temperature"; //IAT, ECT or Fuel temp?
sh.X_axis_correction = 0.1;
sh.X_axis_offset = -273.1;
sh.Z_axis_descr = "SOI limit (degrees)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "°C";
}
}
}
else if (sh.Length == 144)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID / 256 == 0xC0)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
int sIQCount = GetMapNameCountForCodeBlock("Start IQ ", sh.CodeBlock, newSymbols, false);
sh.Varname = "Start IQ (" + sIQCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_descr = "CT (celcius)";
sh.X_axis_correction = 0.1;
sh.X_axis_offset = -273.1;
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "degC";
}
}
else if (sh.Length == 128)
{
if (sh.X_axis_ID / 256 == 0xE0 && sh.Y_axis_ID == 0xC002)
{
// check for valid axis data on temp data
if (IsValidTemperatureAxis(allBytes, sh, MapViewerEx.AxisIdent.Y_Axis))
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
int maflimTempCount = GetMapNameCountForCodeBlock("MAF correction by temperature", sh.CodeBlock, newSymbols, false);
maflimTempCount--;
sh.Varname = "MAF correction by temperature " + maflimTempCount.ToString("D2") + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Limit";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.X_axis_descr = "Intake air temperature"; //IAT, ECT or Fuel temp?
sh.X_axis_correction = 0.1;
sh.X_axis_offset = -273.1;
sh.Correction = 0.01;
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "°C";
}
}
}
else if (sh.Length == 64)
{
if (sh.X_axis_length == 32 && sh.Y_axis_length == 1)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "MAF linearization [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
}
}
else if (sh.Length == 114)
{
if (sh.X_axis_length == 3 && sh.Y_axis_length == 19)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "Torque limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
sh.Y_axis_descr = "Atm. pressure (mbar)";
sh.X_axis_descr = "Engine speed (rpm)";
sh.Correction = 0.01;
sh.XaxisUnits = "rpm";
sh.YaxisUnits = "mbar";
}
}
else if (sh.Length == 38)
{
if (sh.X_axis_length == 19 && sh.Y_axis_length == 1)
{
if (sh.X_axis_ID / 256 == 0xE0)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
int lmCount = GetMapNameCountForCodeBlock("Torque limiter", sh.CodeBlock, newSymbols, false);
sh.Varname = "Torque limiter (" + lmCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
//sh.Y_axis_descr = "Atm. pressure (mbar)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Correction = 0.01;
sh.YaxisUnits = "rpm";
}
}
}
else if (sh.Length == 4)
{
if (sh.X_axis_length == 2 && sh.Y_axis_length == 1)
{
//if (sh.X_axis_ID >= 0xEBA0 && sh.X_axis_ID <= 0xEBAF)
if (sh.X_axis_ID == 0xDF4A)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "MAP linearization [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
}
}
if (sh.X_axis_length == 2 && sh.Y_axis_length == 1)
{
if (sh.X_axis_ID == 0xC002) // idle RPM
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
int lmCount = GetMapNameCountForCodeBlock("Idle RPM", sh.CodeBlock, newSymbols, false);
sh.Varname = "Idle RPM (" + lmCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Y_axis_descr = "Coolant temperature";
sh.Y_axis_correction = 0.1;
sh.Y_axis_offset = -273.1;
sh.Z_axis_descr = "Target engine speed";
sh.YaxisUnits = "°C";
}
}
}
}
}
