| public static DecodeCAT34I050 ( byte Data ) : void | ||
| Data | byte | |
| Результат | void | |
public static void DecodeCAT34I050(byte[] Data)
{
// At this time we do not care about the content of CAT034I050.
// However it is necessary to determine how many subfields of 8 octets
// is present so that data buffer can be updated accordingly in order to
// decode the other fileds of interest
// NOTE: We assume that only first 7 defined subfields are present
// I034/050 System Configuration and Status 1 + 1+
int Number_Of_Octets_Present = 1; // at least two, but that will be determined below
// Decode 020
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].HasBeenPresent == true)
{
// Get an instance of bit ops
Bit_Ops BO = new Bit_Ops();
Bit_Ops CAT34_I050_Data = new Bit_Ops();
//Extract the first octet
BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];
CAT34I050Types.CAT34I050UserData ThisCycleData = new CAT34I050Types.CAT34I050UserData();
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Now check how many data octets is present and decode the present subfileds at the same time
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////
// COM - Common elements of a System
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_1] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.COM_Data.Data_Present = true;
ThisCycleData.COM_Data.System_is_NOGO = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
ThisCycleData.COM_Data.RDPC2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2];
ThisCycleData.COM_Data.RDPC_Reset = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3];
ThisCycleData.COM_Data.RDP_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.COM_Data.Transmision_Sys_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
ThisCycleData.COM_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_6];
ThisCycleData.COM_Data.Time_Source_Invalid = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_7];
}
//////////////////////////////////////////////////////////////////////////////////
// Spare
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_2] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
}
//////////////////////////////////////////////////////////////////////////////////
// Spare
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_3] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
}
//////////////////////////////////////////////////////////////////////////////////
// PSR - Primary sensor component
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_4] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.PSR_Data.Data_Present = true;
ThisCycleData.PSR_Data.Ant_2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == true)
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_A_and_B;
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == false && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == false)
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.No_Channel;
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true)
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_A;
else
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_B;
ThisCycleData.PSR_Data.PSR_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.PSR_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
}
//////////////////////////////////////////////////////////////////////////////////
// SSR - Secondary sensor component
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_5] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.SSR_Data.Data_Present = true;
ThisCycleData.SSR_Data.Ant_2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == true)
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Invalid_Combination;
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == false && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == false)
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.No_Channel;
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true)
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Channel_A;
else
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Channel_B;
ThisCycleData.SSR_Data.SSR_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.SSR_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
}
//////////////////////////////////////////////////////////////////////////////////
// MDS - Mode-S sensor component
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_6] == true)
{
Number_Of_Octets_Present++;
// Mode S subfield is 2 octets
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.MDS_Data.Data_Present = true;
ThisCycleData.MDS_Data.Ant_2_Selected = BO.DWord[CAT34I050Types.Subfiled_1];
if (BO.DWord[CAT34I050Types.Subfiled_3] == true && BO.DWord[CAT34I050Types.Subfiled_2] == true)
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Illegal_Combination;
else if (BO.DWord[CAT34I050Types.Subfiled_3] == false && BO.DWord[CAT34I050Types.Subfiled_2] == false)
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.No_Channel;
else if (BO.DWord[CAT34I050Types.Subfiled_3] == true)
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Channel_A;
else
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Channel_B;
ThisCycleData.MDS_Data.ModeS_Overloaded = BO.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.MDS_Data.Monitor_Sys_Disconected = BO.DWord[CAT34I050Types.Subfiled_5];
ThisCycleData.MDS_Data.CH2_For_Coordination_In_Use = BO.DWord[CAT34I050Types.Subfiled_6];
ThisCycleData.MDS_Data.CH2_For_DataLink_In_Use = BO.DWord[CAT34I050Types.Subfiled_7];
ThisCycleData.MDS_Data.Coordination_Func_Overload = BO.DWord[CAT34I050Types.FX_Primary_Subfiled]; // Not really FX but the index is correct
Number_Of_Octets_Present++;
// Mode S subfield is 2 octets
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.MDS_Data.DataLink_Func_Overload = BO.DWord[CAT34I050Types.Subfiled_1];
}
//////////////////////////////////////////////////////////////////////////////////
// Spare
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_7] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
}
//////////////////////////////////////////////////////////////////////////////////
// Now assign it to the generic list
CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].value = ThisCycleData;
//////////////////////////////////////////////////////////////////////////////////
// Increase data buffer index so it ready for the next data item.
CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present;
}
}
// This method will accept a buffer of data with the assumption that
// category has been determined. It will then decode the data and save
// it in the shared buffer. Everry time a message is passed in the data
// will be appended to the buffer. This means that each line will contain
// data for one message. For data items which are not in the message,
// indicated by the FSPEC field, N/A will be inserted instead. The shared
// buffer is loacted in the SharedData and will not be saved. It is responsibility
// of the user to save the data in a file it desired.
public static void Do(byte[] Data)
{
/////////////////////////////////////////////////////////////////////////
//
// Next version of Category 002: PSR Radar, M-SSR Radar, Mode-S Station
// Length in bytes
//
// I002/000, Message Type 1
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("000")].CurrentlyPresent == true)
{
CAT34I000UserData.DecodeCAT34I000(Data);
}
// 3 I034/030 Time-of-Day 3
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("030")].CurrentlyPresent == true)
{
CAT34I030UserData.DecodeCAT34I030(Data);
}
// 4 I034/020 Sector Number 1
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("020")].CurrentlyPresent == true)
{
CAT34I020UserData.DecodeCAT34I020(Data);
}
// 5 I034/041 Antenna Rotation Period 2
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("041")].CurrentlyPresent == true)
{
CAT34I041UserData.DecodeCAT34I041(Data);
}
// 6 I034/050 System Configuration and Status 1+
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].CurrentlyPresent == true)
{
CAT34I050UserData.DecodeCAT34I050(Data);
}
// 7 I034/060 System Processing Mode 1+
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("060")].CurrentlyPresent == true)
{
CAT34I060UserData.DecodeCAT34I060(Data);
}
// FX
// 8 I034/070 Message Count Values 1+2N
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("070")].CurrentlyPresent == true)
{
CAT34I070UserData.DecodeCAT34I070(Data);
}
// 9 I034/100 Generic Polar Window 8
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("100")].CurrentlyPresent == true)
{
CAT34I100UserData.DecodeCAT34I100(Data);
}
// 10 I034/110 Data Filter 1
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("110")].CurrentlyPresent == true)
{
CAT34I110UserData.DecodeCAT34I110(Data);
}
// 11 I034/120 3D-Position of Data Source 8
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("120")].CurrentlyPresent == true)
{
CAT34I120UserData.DecodeCAT34I120(Data);
}
// 12 I034/090 Collimation Error 2
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("090")].CurrentlyPresent == true)
{
CAT34I090UserData.DecodeCAT34I090(Data);
}
////////////////////////////////////////////////////////////////////////////////////
// All CAT34 data has been decoded, so lets save off the message data to the global
// storage for latter usage
MainASTERIXDataStorage.CAT34Data CAT34MessageData = new MainASTERIXDataStorage.CAT34Data();
foreach (CAT34.CAT34DataItem Item in CAT34.I034DataItems)
{
CAT34.CAT34DataItem MyItem = new CAT34.CAT34DataItem();
MyItem.CurrentlyPresent = Item.CurrentlyPresent;
MyItem.Description = Item.Description;
MyItem.HasBeenPresent = Item.HasBeenPresent;
MyItem.ID = Item.ID;
MyItem.value = Item.value;
CAT34MessageData.CAT34DataItems.Add(MyItem);
}
MainASTERIXDataStorage.CAT34Message.Add(CAT34MessageData);
CAT34.Intitialize(false);
}
