public override void NameKnownMaps(byte[] allBytes, SymbolCollection newSymbols, List<CodeBlock> newCodeBlocks)
{
SymbolAxesTranslator st = new SymbolAxesTranslator();
foreach (SymbolHelper sh in newSymbols)
{
// sh.X_axis_descr = st.TranslateAxisID(sh.X_axis_ID);
// sh.Y_axis_descr = st.TranslateAxisID(sh.Y_axis_ID);
if (sh.X_axis_length == 4 && sh.Y_axis_length == 20)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
//int lmCount = GetMapNameCountForCodeBlock("Torque limiter", sh.CodeBlock, newSymbols, false);
sh.Varname = "Torque limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
//sh.Y_axis_descr = "Atm. pressure (mbar)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Correction = 0.01;
sh.YaxisUnits = "rpm";
}
if (sh.X_axis_length == 4 && sh.Y_axis_length == 21)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
//int lmCount = GetMapNameCountForCodeBlock("Torque limiter", sh.CodeBlock, newSymbols, false);
sh.Varname = "Torque limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
//sh.Y_axis_descr = "Atm. pressure (mbar)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Correction = 0.01;
sh.YaxisUnits = "rpm";
}
else if (sh.X_axis_length == 3 && sh.Y_axis_length == 21)
{
if (!CollectionContainsMapInSize(newSymbols, 21, 4))
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
//int lmCount = GetMapNameCountForCodeBlock("Torque limiter", sh.CodeBlock, newSymbols, false);
sh.Varname = "Torque limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
//sh.Y_axis_descr = "Atm. pressure (mbar)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.Correction = 0.01;
sh.YaxisUnits = "rpm";
}
}
else if (sh.X_axis_length == 16 && sh.Y_axis_length == 8)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
int dwCount = GetMapNameCountForCodeBlock("Driver wish ", sh.CodeBlock, newSymbols, false);
sh.Varname = "Driver wish (" + dwCount.ToString() + ") [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Throttle position";
sh.Z_axis_descr = "Requested IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "TPS %";
}
else if (sh.X_axis_length == 15 && sh.Y_axis_length == 16)
{
sh.Category = "Detected maps";
sh.Subcategory = "Misc";
sh.Varname = "IQ to Torque conversion [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Correction = 0.01;
sh.X_axis_correction = 0.1;
sh.X_axis_descr = "Torque";
sh.Z_axis_descr = "IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "Nm";
}
else if (sh.X_axis_length == 11 && sh.Y_axis_length == 10)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "Boost limit map [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
// sh.Correction = 0.01;
//sh.X_axis_correction = 0.01;
sh.X_axis_descr = "Atmospheric pressure (mbar)";
sh.Z_axis_descr = "Maximum boost pressure (mbar)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mbar";
}
else if (sh.X_axis_length == 19 && sh.Y_axis_length == 15)
{
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
int injDurCount = GetMapNameCountForCodeBlock("Injector duration", sh.CodeBlock, newSymbols, false);
sh.Varname = "Injector duration " + injDurCount.ToString("D2") + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.Y_axis_correction = 0.01; // TODO: Check for x or y
sh.Correction = 0.023437;
sh.X_axis_descr = "Engine speed (rpm)";
//sh.Y_axis_descr = "Airflow mg/stroke";
sh.Y_axis_descr = "Requested Quantity mg/stroke";
sh.Z_axis_descr = "Duration (crankshaft degrees)";
sh.XaxisUnits = "rpm";
sh.YaxisUnits = "mg/st";
}
else if (sh.X_axis_length == 16 && sh.Y_axis_length == 12)
{
//int xmax = GetMaxAxisValue(allBytes, sh, MapViewerEx.AxisIdent.X_Axis);
//int ymax = GetMaxAxisValue(allBytes, sh, MapViewerEx.AxisIdent.Y_Axis);
//Console.WriteLine(xmax.ToString() + " " + ymax.ToString() + " " + sh.Flash_start_address.ToString("X8"));
if (GetMaxAxisValue(allBytes, sh, MapViewerEx.AxisIdent.Y_Axis) < 4000)
{
sh.Category = "Detected maps";
sh.Subcategory = "Limiters";
sh.Varname = "Smoke limiter [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";
sh.Z_axis_descr = "Maximum IQ (mg)";
sh.Y_axis_descr = "Engine speed (rpm)";
sh.X_axis_descr = "Manifold pressure (mbar)";
sh.Correction = 0.01;
//sh.X_axis_correction = 0.1; // TODO: Check for x or y
sh.YaxisUnits = "rpm";
sh.XaxisUnits = "mbar";
}
}
else if (sh.X_axis_length == 16 && sh.Y_axis_length == 14)
{
// SOI
sh.Category = "Detected maps";
sh.Subcategory = "Fuel";
int injDurCount = GetMapNameCountForCodeBlock("Start of injection (SOI)", sh.CodeBlock, newSymbols, false);
//Console.WriteLine("Temperature switch for SOI " + injDurCount.ToString() + " " + tempRange.ToString());
//sh.Varname = "Start of injection (SOI) " + injDurCount.ToString("D2") + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.Varname = "Start of injection (SOI) " + injDurCount.ToString() + " [" + DetermineNumberByFlashBank(sh.Flash_start_address, newCodeBlocks) + "]";// " + sh.Flash_start_address.ToString("X8") + " " + sh.X_axis_ID.ToString("X4") + " " + sh.Y_axis_ID.ToString("X4");
sh.Correction = 0.023437;
//sh.Offset = 78;
sh.Y_axis_descr = "Engine speed (rpm)";
sh.YaxisUnits = "rpm";
sh.X_axis_correction = 0.01; // TODODONE : Check for x or y
sh.XaxisUnits = "mg/st";
sh.X_axis_descr = "IQ (mg/stroke)";
sh.Z_axis_descr = "Start position (degrees BTDC)";
}
}
}